ERROR DISPLAY

Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.
3-1. Operator Call Error (Alarm LED Blinking in Orange)

Alarm LED
blinking Error Corrective action
2 times      No paper Set paper, and press the Resume/Cancel button to feed the paper.
3 times      Paper jam Remove the jammed paper, and press the  Resume/Cancel button.
4 times      No ink Replace the ink cartridge(s), or press the Resume/Cancel button to continue printing
without replacing the ink cartridge(s).
5 times     The ink cartridges are not properly installed, or a non-supported ink cartridge is installed
(the ink cartridge EEPROM data is abnormal).
Install the ink cartridges properly.
Or, confirm that the supported ink cartridges are
installed.
7 times        Ink cartridge not installed Install the ink cartridge(s), and close the access cover.
8 times        Waste ink absorber full or platen waste ink absorber full warning (approx. 95% of the maximum capacity)
Pressing the Resume/Cancel button will exit the
error, and enable printing.
14 times       Non-supported ink cartridge installed Replace the non-supported ink cartridge with the
supported one.
16 times       Used ink cartridge installed, or no ink Pressing the Resume/Cancel button will exit the error, and enable printing.